FUNAI ZV450TT8 - Manual (Page 93)

93 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function
Setup
VCR Functions
Others
Español
VCR FUNCTIONS
Playback Recording
1) Press [POWER] on the remote control or the front
panel of the unit.
When you are playing back a cassette tape, turn the TV
on and be sure to select the input to which the unit is
connected.
Press [VCR
].
2) Insert a prerecorded cassette tape. Press [PLAY B]
to begin playback.
3) During playback, press [PAUSE F].
Playback will pause and sound will be muted.
4) Press [PLAY B] to resume playback.
5) Press [STOP C] to stop playback.
6) Press [OPEN/CLOSE A] to eject the cassette tape.
Note
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press [CH
K
/ L].
Press [VCR ] first.
Before recording, make sure:
• The appropriate external input position (L1/L2) to which
your external tuner is connected is selected by pressing
[INPUT SELECT].
• There is a cassette tape with an erase-protection tab in
the unit.
• The desired recording speed is selected in SP (standard
playback) or SLP (super long playback) mode by
pressing [REC SPEED].
Recording speed:
Tape speed Recording / playback time
Type of tape T60 T120 T160
SP / 2H 1hour 2hours 2-2/3hours
SLP / 8H 3hours 6hours 8hours
• Refer to pages 46-49 for instructions on timer recording.
1) Press [REC/OTR] to begin the recording.
To temporarily stop recording or to resume it, press
[PAUSE F]. After the unit has been in pause mode for
5 minutes, it will stop automatically to protect the
cassette tape and the video head from damage.
2) Press [STOP C] when the recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
the hole with cellophane tape.
erase-protection tab