Fujitsu Siemens Computers N3010 - Manual (Page 5)

5
Floppy Disk A: ■ Disabled
■ 1.44/1/2 MB 3.5”
[1.44/1.2 MB 3.5”] Allows you to select floppy disk drive type (nte that 1.2 MB 3.5”
references a 1024 byte/sector Japanese media format.)
Primary Master: ■ Selects Primary
Master submenu The product
number of the hard
drive. Display the type of device on this ATA/ATAPI interface, if there
is one. Pressing the Enter key selects the Primary Master sub-
menu allowing additional device configuration options for this
interface.
Secondary Master ■ Selects Secondary
Master submenu The product
number of the
CD-ROM drive. Display the type of device on this ATA/ATAPI interface, if there
is one. Pressing the Enter key selects the Secondary Master sub-
menu allowing additional device configuration options for this
interface
Language: ■ English (US)
■ Japanese (JP)
[English (US)] The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Options Default Description
M a i n M e n u