Fender Power Stage 100 - Manual (Page 10)

10
FULL MONITOR WITH AN INSTRUMENT
1. Connect your instrument to the Inst jack on the
PowerStage 100 and to the line in on your mixer.
2. Connect a cord from the Instrument’s line output
jack to your main mixing console.
3. Next, connect a cord from the monitor out on
your mixing console back to the Aux Line in jack on
the PowerStage 100. You now have a full monitor
mix with all effects from your mixing console in the
PowerStage 100. To turn up the full monitor mix,
turn up the Line volume (item C page 4).
4. Remember, turning up the Mic 2 / Inst volume
WILL NOT affect the output of the main P.A.
system. It WILL determine how much of your
"dry" signal you will hear.