Operating instructions, Cycle settings – FRIGIDAIRE 137339000A User Manual

Page 11

Advertising
background image

11

OPERATING INSTRUCTIONS

Dry Level (Auto Dry)

To change the preset level, press the Dry Level button

to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are available

with every cycle. If a Dry Level is not appropriate for the

cycle, it cannot be selected.
The Dry Level selected for the cycle will be remembered

and recalled each time that cycle is selected in the future.

Í

NOTE

To change the Dry Level after the cycle starts, press

Pause, adjust the setting and press Start to resume

the cycle.

Select the Normal dry level for most Auto Dry cycles.
Occasionally a load may seem too damp or over-dried at

the end of the cycle. To increase drying time for similar

loads in the future, select More. For loads requiring less

drying time, select Less.
Select Damp for items you wish to partially dry before

hanging or ironing.

High

Recommended for most cotton fabrics.
Normal

Recommended for wrinkle free, easy care, lightweight

fabrics and bulky loads.
Low

Recommended for delicate fabrics.
Air Dry

This setting (no heat) should only be used with a

Timed Dry cycle to dry items containing feathers,

down, foam rubber, plastics or rubber-like materials;

to refresh clothing, stuffed animal, pillows or blankets;

and to dust draperies.

Cycle Settings

Appropriate drying Temperature, Dryness Level and

Options will automatically be displayed for each cycle.

The settings can be changed before the cycle is started.
Drying Temperature

To change the preset temperature, press the Temp

button to scroll to the desired setting.
To protect your fabrics, not all temperatures are available

with every cycle.
The temperature selected for the cycle will be remembered

and recalled each time that cycle is selected in the future.

Follow the fabric care label instructions

on items to be dried.

For best results

Í

NOTE

To change the Temperature after the cycle starts, press

Pause, adjust the setting and press Start to resume the

cycle.

Sanitize

Recommended for durable fabrics and towels. Use this

selection to remove harmful bacteria from your clothing or

other items where sanitization is desired.

NSF Protolcol P154

Sanitization Performance of
Residential Clothes Dryers

Í

NOTE

The Sanitize option has been certifi ed by NSF

International

®

, an independent third-party testing and

certifi cation organization dedicated to public health,

safety and environmental protection.

This option will kill 99.9% of bacteria with no carryover of

bacteria between loads. A higher temperatures is required.

Please check fabric care labels to prevent damage.

To return to factory

settings, press these

two buttons at the

same time and

hold until the signal

sounds.

To return to factory

settings, press these

two buttons at the

same time and

hold until the signal

sounds.

Advertising