FRIGIDAIRE 137339000A - Manual (Page 13)

13
OPERATING INSTRUCTIONS
Wrinkle Release
Select Wrinkle Release if the dried load might not
be removed promptly at the end of the cycle. The dry
load will continue tumbling without heat to help reduce
wrinkling. When Chime is selected, a beep will be
heard periodically. The load may be removed any time
during Wrinkle Release.
Line Dry
Select this option to simulate hanging your laundry in
a summer breeze combined with the wrinkle-releasing
benefi ts of tumble action. Since drying times are
calculated with the dryer’s automatic moisture sensors
and heat is radically reduced or eliminated, cycle time
will be lengthened. As a result, depending on moisture
content of load, overall energy consumption decreases.
Available on Mixed Load (on select models), Normal,
Casual, Jeans (on select models), and Delicates.
Delay Start
Press Delay Start to select a drying time convenient
to your schedule or during off peak energy hours. The
delay time selected will be displayed and begin counting
down when you select Start.
Cycle Options, continued
line
dry
wrinkle
release
delay
start
shrink
guard
anti
static
control
lock
chime
sanitize
high
normal
low
air dry
max
high
normal
low
damp
90
75
60
30
touch
up
ready steam system
line
dry
wrinkle
release
add
steam
delay
start
anti
static
control
lock
sanitize
high
normal
low
air dry
max
high
normal
low
damp
90
75
60
30
touch
up
ready steam system
sanitize
high
normal
low
air dry
max
high
normal
low
damp
line
dry
wrinkle
release
chime
delay
start
shrink
guard
control
lock
ultra capacity
Í NOTE
While counting down during Delay Start, you
will notice your dryer periodically tumbling for a
few minutes without heat to redistribute the load,
maximizing load freshness.
Chime (Press & Hold on some models)
A signal will sound at the end of the cycle (and
periodically during Wrinkle Release) if this option is
selected.
Anti Static (on select models)
The Anti Static option injects steam into the clothing
just before cycle completion to reduce static.
Shrink Guard (on select models)
Select Shrink Guard to lower the initial drying
temperature to protect fabrics from overdrying.
Control Lock
To lock the controls between cycles, press and hold the
Control Lock button for 5 seconds. Repeat to unlock
the controls when you are ready to operate the dryer.
Use this feature to reduce the likelihood of accidental
operation by children.