FUJITSU FTP-624MCL303 - Manual (Page 2)

2
FTP-624MCL303/304/FTP-624DSL113
■ DESIGNATION
*1: 303 is for front paper insertion (curl path) and 304 is for rear paper insertion (straight path).
*2: Includes ANK+Kanji and Flash Memory.
Printer mechanism FTP-624MCL303/304* 1
Interface board (Centronics /RS-232C) FTP624DSL113* 2
LSI Micro Controller Unit FTP-624CU112
Thermal head cable FTP-624Y001
Parallel interface cable FTP-441Y201
Cables
Serial interface cable FTP-624Y301
Power cables FTP-621Y401
FTP-621Y601
Part number Item
Part number FTP-624MCL303/304
Printing method Thermal-sensitive line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Paper width (MCL303) 58 mm
Paper width (MCL304) 60 mm
Paper thickness 60 to 100
µ
m
Number of columns 32 columns/line (24
×
12 dot font)
480 dotlines/s (60 mm/s)
Conditions: 1 ply, printing on high sensitive thermal paper,
8 columns of “H” /line, double density 16
×
8 dot font,
room temperature, 8.5 VDC drive
JIS ANK : 128 International : 195
Character types ASCII : 31
JIS KANJI : approximately 6800
24
×
12 dots, (3.0
×
1.5 mm), 32 columns
16
×
8 dots, (2.0
×
1.0 mm), 48 columns
16
×
16 dots, (2.0
×
2.0 mm), 24 columns
24
×
24 dots, (3.0
×
3.0 mm), 16 columns
Interface Centronics / RS-232C (selectable by dip swtich)
■ GENERAL SPECIFICATIONS
Specifications Item
Maximum printing speed
Character, dimensions (H
×
W), number of
characters
(Continued)