5 optional temperature sensors – Furuno Network Sounder DFF3 User Manual
Page 17
Advertising
![background image](/manuals/103481/17/background.png)
1. MOUNTING
10
1.5
Optional Temperature Sensors
1.5.1
Transom mount temperature sensor T-02MTB
• Fix the cable at a convenient location with cable clamp.
• When the cable is led in through the transom board, make a hole of approx. 17 mm in diameter
to pass the connector. After passing the cable, fill the hole with a sealing compound.
5x20
Mount sensor
flush with hull bottom.
D
D>50cm
Advertising