Inserting battery – Fujitsu Siemens Computers LOOX 700 User Manual

Page 22

Advertising
background image

錯誤

! 尚未定義樣式。

14

A26391-K151-Z120-1-7619, Edition 1

Inserting battery

2

3

1

Press the release (1) in the direction of the arrow and hold it pressed.

Lift the cover (2) and pull it in the direction of the arrow from the Pocket-PC.

Slide the switch (3) in direction of the arrow.

8

7

4

5

6

Lay the battery in the battery compartment (4 +5). Watch the contact connections.

Slide the switch (6) in direction of the arrow.

Position the cover on its slot in the direction of the arrow (7).

Carefully flap the cover down (8) until you feel it latch in place.

i

The battery is not charged at the time of delivery. Therefore, charge the battery for
12 hours before the first mobile use (see "Connecting PSC11R-050 power adapter"
section).
When you replace the battery, an internal backup battery prevents your data from being
lost. This backup battery can buffer the data for up to 30 minutes. The buffer time is
dependent on the charging level of the backup battery.

Advertising