Fujitsu Siemens Computers LOOX 700 - Manual (Page 50)

錯誤 ! 尚未定義樣式。
42 A26391-K151-Z120-1-7619, Edition 1
Tips and tricks
Activating an entry in Quick menu immediately after starting FSC SpeedMenu:
You need not scroll downward through all entries, but instead can use the roll-over function. Simply
press the Up arrow on the navigation key following the program start and you immediately go to the
bottom entry.
Inserting first entry in an empty menu:
Open the popup menu of the elements Separating bar or Foot bar. The entry is then entered in the
Main menu or in the Quick menu.
Inserting entry at end of Main menu
If the list of the Main menu entries is so long that it no longer fits on the display, an arrow button
appears at the lower end (also see the section "Programme structure”). To insert an entry at the end
of this long menu, proceed as follows:
Touch the arrow button (down arrow) and leave the stylus on the arrow button for a moment. This
scrolls down through the entries. As soon as the bottom entry is reached, the arrow button turns grey
and can no longer be actuated. Briefly remove the stylus and then touch the button again. A popup
menu appears and you can add your new entry.