Fujitsu Siemens Computers LOOX 700 - Manual (Page 42)

錯誤 ! 尚未定義樣式。
34 A26391-K151-Z120-1-7619, Edition 1
Synchronising data with new PC/notebook
If you want to synchronise data with a new PC/notebook, you must first install ActiveSync on this new
PC/notebook and establish a new ActiveSync partnership (see the corresponding explanation in the
section "Initial start-up").
Backing up data with FSC Backup
The Pocket PC saves your data such as appointments, addresses, things to do and notes, as well as
all documents in the RAM memory of the device. These data are backed up to your PC during
synchronisation with ActiveSync. However, to also make current data backups away from home or
while on business trips, there is FSC Backup.
FSC Backup backs up an image of the RAM memory of your Pocket PC on a memory card ("Secure
Digital I/O" or "MultiMediaCard") or in the integrated memory area, the LOOXstore (if this memory
area exists). If your Pocket PC has experienced a power failure and the data from the RAM memory
have been deleted, then you can restore a data backup you have made with FSC Backup. This
provides you with the data status at the time of the backup again within just a few minutes.
As FSC Backup backs up and restores the entire RAM memory of your device, the registry, which
contains the configuration data of your device and any programs installed in the RAM memory, is
also backed up.
FSC Backup also provides you with the option of backing up and restoring single databases such as
contacts, calendar or tasks as well as your connection settings. You will find information as to how
you proceed for this in the FSC Backup help file on your Pocket PC.
Before you start a backup, make sure that sufficient memory space is available on the memory card
or in the device, and that the battery holds a sufficient charge. If the battery charge level is low,
connect the PSC11R-050 power adapter to charge the battery.
!
When you conduct a backup, you may not carry out any other operating procedure before
the backup has been completed. Do not press any keys, touch the display or remove a
memory card.
Backup
► Select Start - Programs - FSC Backup.
► When the screen of the FSC Backup program appears, select a destination for the backup.
Select the entry SD-MM Card for a memory card.
►
Tap on the Backup button.
A message is output when the backup has been completed.
► Touch
OK (navigation bar) to confirm your setting.
The screen of FSC Backup appears again on the display.