FUJITSU FR family 32-bit microcontroller instruction manuel CM71-00101-5E - Manual (Page 95)

71
CHAPTER 7 DETAILED EXECUTION INSTRUCTIONS
7.110 DMOVB (Move Byte Data from Direct Address to Register)
7.111 DMOVB (Move Byte Data from Register to Direct Address)
7.112 DMOVB (Move Byte Data from Direct Address to Post Increment Register Indirect
Address)
7.113 DMOVB (Move Byte Data from Post Increment Register Indirect Address to Direct
Address)
7.114 LDRES (Load Word Data in Memory to Resource)
7.115 STRES (Store Word Data in Resource to Memory)
7.116 COPOP (Coprocessor Operation)
7.117 COPLD (Load 32-bit Data from Register to Coprocessor Register)
7.118 COPST (Store 32-bit Data from Coprocessor Register to Register)
7.119 COPSV (Save 32-bit Data from Coprocessor Register to Register)
7.120 NOP (No Operation)
7.121 ANDCCR (And Condition Code Register and Immediate Data)
7.122 ORCCR (Or Condition Code Register and Immediate Data)
7.123 STILM (Set Immediate Data to Interrupt Level Mask Register)
7.124 ADDSP (Add Stack Pointer and Immediate Data)
7.125 EXTSB (Sign Extend from Byte Data to Word Data)
7.126 EXTUB (Unsign Extend from Byte Data to Word Data)
7.127 EXTSH (Sign Extend from Byte Data to Word Data)
7.128 EXTUH (Unsigned Extend from Byte Data to Word Data)
7.129 LDM0 (Load Multiple Registers)
7.130 LDM1 (Load Multiple Registers)
7.131 STM0 (Store Multiple Registers)
7.132 STM1 (Store Multiple Registers)
7.133 ENTER (Enter Function)
7.134 LEAVE (Leave Function)
7.135 XCHB (Exchange Byte Data)