Franklin RF-1064 - Manual (Page 10)

9
Entering Records
To Enter a Schedule Record or Memo
Schedule records and memos contain three lines of
information of up to 36 characters per line. The second
and third lines store only numbers. You can also set a
reminder alarm to sound whenever a scheduled event
occurs. Read “Using the Alarms.”
1. Press (
SCHD
/
MEMO
) until the schedule or memo
pad appears.
2. Type an event description or memo:
• To type lower case letters, press ▲ (
CAP
) to disengage
the caps lock and then type letters. Press ▲ (
CAP
) to
engage the caps lock.
• To type symbols (e.g., $, :, #), press SHIFT twice to
engage the shift lock, press X (
SYM
) until the symbol
you want appears, and then press SHIFT.
3. Press ENTER or ▼ (
M
.
CK
/
NEXT
) to go to the next line.
4. In the second line, type the year, month, and date of
the event, and then press ENTER or ▼ (
M
.
CK
/
NEXT
).
If you are entering a memo, you can type numbers in
the second and third lines.
5. In the third line, type the time of the event.
6. To change the time to or from a.m. and p.m.,
press G (
DST AM
/
PM
).
The cursor must be positioned at a time digit (hour or
minute) and the home time must be in the 12-hour
time display.
7. Press ENTER to store the record.