Franklin RF-1064 - Manual (Page 14)

13
Using the Calculator
To Make Calculations
1. Press (
CAL
/
CONV
) until the calculator screen
appears.
0.
2. Type a number.
You can type up to 10 digits. To change the number
to or from positive or negative, press L (+/-).
3. Press the addition, subtraction, multiplication, or
division key.
4. Type another number.
5. Press = to make your calculation.
6. To clear the calculation, press C (
C
/
CE
).
Or press F (%) to calculate a percentage.
To Use the Calculator Memory
1. Make a calculation as shown above or simply type
a number in the calculator.
2. Press P (
M
+) to add the result to the memory as a
positive number or O (
M
-) to add it to the memory
as a negative number.
3. To retrieve the number from memory,
press I (
MR
).
4. To clear the calculator memory, press U (
MC
).