First Alert FA168C - Manual (Page 21)

– 21 –
9LHZLQJ&XUUHQW'DWHDQG7LPH
9LHZLQJWKH&XUUHQW'DWHDQG7LPH
The system lets you view its time and date setting on alpha keypad.
+[#] + [6] [3]
(Security Code)
OR, press the function key (A, B, C, or D) for viewing
current date and time, if programmed.
Alpha Display:
(-7%61)(
6)%(= 83 %61
A typical time/date display is shown.
The display will remain on for about 30 seconds.
8-1)(%8) 7%8
 %1C 
“A ” “ B ” “C ” “D ”
If one of the above keys has been programmed for the date/time
display feature, place a check mark in the box beneath that key.
6HWWLQJWKH'DWHDQG7LPH
You can set the time and date by doing the following:
1. +[#] + [6] [3]
(Security Code)
Alpha Display:
(-7%61)(
6)%(= 83 %61
2. Press [
∗
] when the time/date is displayed.
A cursor appears under the first digit of the hour.
To move cursor ahead, press [
∗
]. To go back, press [#].
•
Enter the 2-digit hour setting.
•
Enter the 2-digit minute setting.
•
Press [1] for PM or [2] for AM.
•
Enter the last two digits of the current year.
•
Enter the 2-digit month setting.
•
Enter the 2-digit day setting.
3. To exit, press [
∗
] when cursor is at the last digit, or
wait 10 seconds.
8-1)(%8) 7%8
 41 
Current time display
8-1)(%8) 7%8
 4
Time/date editing display