FOCUS Enhancements DVCPRO/DV User Manual
Page 113
FS-100 Portable DTE Recorder
95
• Use the
Keeper
key to cycle through the available Reels.
For example, if the current Reel selection is 3. pressing
Keeper
changes the selection to Reel 4.
To purchase the wired remote control, p/n
ACSS-0019-01
, for
the FS-100, visit Focus Enhancements web site at
www.focusinfo.com/sales/store/
.
•
Syncro Slave
Use this mode when the camcorder does not have FS-100
compatible external control or the tapeless trigger functionality.
In
Syncro Slave
control mode, the
FS-100 mimics the camcorder’s operations by monitoring the
camcorder’s tape record state.
•
AV/C
Use AV/C in playback mode and other situations where the FS-
100 is controlled by an external FireWire device such as a NLE
system that is not supported by Direct To Edit Technology. In
these cases, the FS-100 can be used in a manner similar to a
camcorder to capture footage to the NLE.
•
Tapeless Control
The Tapeless Control mode allows the FS-100 to be controlled
from a camcorder, if it features a FS-100 compatible Tapeless
control setting separate from the tape transport. It is
recommended to use this control mode with the companion
camcorder, the Panasonic AG-HVX200.
Do Not Use AV/C control in Record Mode
Camcorder Requirements for Tapeless Control Mode
Tapeless Control mode will not work unless it is supported by the
camcorder and the camcorder is placed in this external control mode.
Please refer to Configuring AG-HVX200 and Recording on page 37.