Initial setup – FOCUS Enhancements DVCPRO/DV User Manual
Page 118
Using the FS-100 with a Computer
FS-100 Portable DTE Recorder
100
To move video files from the FS-100 to a computer:
• Connect the FS-100’s
Computer I/O
1394 port directly to a
computer with an active OHCI compliant IEEE-1394 FireWire
port and the necessary FireWire disk drive drivers.
• To use the FS-100 HDD Bypass mode, refer below for more
information.
The FS-100 is compatible with any computer system that can read
FAT 32 volumes, such as Windows 98SE/ME/2000/XP and Mac
OS9/OS10.
Initial Setup
1.
Connect the FS-100 through its
COMPUTER I/O
1394 port to the
computer system using a standard 6-pin to 6-pin FireWire
cable.
2.
Enter HDD mode and enable DD Drive.
This step is required before mounting the FS-100 to a com-
puter.
•
On the FS-100 go to the
HDD
screen.
•
Select
DD Drive
and
Right
arrow to
Connect
screen.
•
Press
Enable
function button.
Refer to the section,
3.
Connect power to the drive if necessary.
4.
Consult the computer’s documentation for more information.
For More Information
Go to the FOCUS Enhancements' website (www.focusinfo.com) for more
compatibility information.