Using vfr recordings in nles – FOCUS Enhancements DVCPRO/DV User Manual
Page 87
FS-100 Portable DTE Recorder
69
Using VFR recordings in NLEs
Use the
Base Frame Rate
for the NLE’s timeline setting.
For example, if the
Base Frame Rate
is 720/24P and the
Incoming Frame Rate
is set to 48 or 12, the timeline preset to
use is 720/24P.
A real-time recording has an equivalent
Base Frame Rate
and
Incoming Frame Rate
.
When using VFR recordings in editing, the real-time recordings
must match the VFR recording's DV FORMAT and
Base Frame
Rate
.
For example, when editing with VFR recordings that have the
DV FORMAT of
QUICKTIME PN
and a
Base Frame Rate
of
720/
24P
, then the real-time recordings must be made with
QUICKTIME PN
as the DV FORMAT and a
Base Frame Rate
of
720/24P
and the VFR MODE set to
OFF
.
This insures that the VF and real-time recordings can be used
in the same timeline without rendering.
Camera Resolution must be set to 720P mode:
The camera resolution must to set to the corresponding 720P mode and
NOT the 720PN mode for VFR recordings.