FUJITSU Image Scanner fi-6670(A) - Manual (Page 12)

12
2
Installing the Scanner
The following describes how to install the scanner.
1
Place the scanner at its installation site.
The outer dimensions and the spaces required for installing the respective scanner types are as
follows:
2
Unlock the Transport Lock (Flatbed type only).
Using a coin or similar, rotate the Transport Lock counterclockwise by 90 degree to unlock it.
3
Adjust the position of the ADF (Flatbed type only).
1)
Holding the handle, lift open the Document Cover.
2)
Remove the ADF Lock Screws, and then set them to the Lock Screw Storage Holes.
(13.0)
(19.6)
(13.4)
329
1179
690 (27.1)
432 (17.0)
686
500 700
342
1030 (40.5)
300 (11.8)
640 (25.1)
390 (15.3)
(27.0)
(46.4)
(27.5)
(Unit: mm/inches)
Flatbed type ADF type
Installation space
Outer dimensions