Furuno GP-30/35 - Manual (Page 20)

3-2
f) Enter a comment (max. sixteen char-
acters) with the Cursor Pad and press
the [ENT] key. To create a space se-
lect “blank” character. To remove all
characters which follow the cursor,
select the underline.
g) Press the [ENT] key.
h) Press the [ENT] key again to finish.
Entering a waypoint at own ship’s
position
1. Press the [MARK/MOB] key. The fol-
lowing window appears.
NAME: 001
34
°
39.836’N MARK
135
°
12.059’E +
12—DEC—97 11:25
Exit? MOB?
GPS POS.
→
MARK
Figure 3-4 Own ship’s position window
2. If you do not need to change mark shape
or enter a comment, press the [ENT] key
to finish.
3. If you want to change mark shape, place
the cursor under MARK. Press the [ENT]
key, select mark shape, and press the
[ENT] key again.
4. The cursor is on the date/time line. To
change the date to a comment, press the
[ENT] key, enter a comment, and press
the [ENT] key again.
5. The cursor is on Exit?. Press the [ENT]
key to finish.
Note: The name of a waypoint entered at
own ship’s position cannot be changed when
entered. However, it can be changed on the
WYPTS/MARKS menu.
Entering a waypoint through the
menu
1. Press the [MENU] key twice.
2. Select WAYPOINTS.
3. Press the [ENT] key. The WYPTS/
MARKS menu appears.
WYPTS/MARKS
[NEW?] CURSOR MOB
START ------- --------
-------- ------- --------
-------- ------- --------
-------- ------- --------
-------- ------- --------
-------- ------- --------
Figure 3-5 WYPTS/MARKS menu
4. Press the [ENT] key.
ENTER A NEW WYPT NAME.
0 0 1 - - - ?
(001:DEFAULT NAME)
Quite: [MENU]
Figure 3-6 Screen for entering
waypoint name
5. Enter name (if desired) and press the
[ENT] key.
NAME: 001
34
°
39.836'N* MARK
135
°
12.059'E* +
12–DEC–97 11:25
Exit?
* Present position
Figure 3-7 Screen for entering
waypoint latitude and longitude
6. Operate the Cursor Pad to place the cur-
sor on the second line (latitude) and press
the [ENT] key. Enter latitude (LOP) and
press the [ENT] key.