Furuno GP-30/35 - Manual (Page 22)

3-4
4. Select DSP GOTO or DSP ALL and press
the [ENT] key.
5. Press the [MENU] key twice to finish.
3.4 Editing Waypoints on the
WYPTS/MARKS List
Waypoint position, waypoint name, mark
shape and comment can be edited on the
WYPTS/MARKS List.
1. Press the [MENU] key twice.
2. Select WAYPOINTS and press the
[ENT] key.
3. Select waypoint to edit and press the
[ENT] key.
Note: You cannot edit CURSOR, MOB
or START.
4. To change waypoint name or create a
new waypoint from an existing one, first
select the NAME line and press the
[ENT] key.
5. Change name with the Cursor Pad and
press the [ENT] key. You are then asked
if you want to create or rename the
waypoint, or quit (escape) this display.
CREATE?
RENAME?
Quit?
Figure 3-12 CREATE, RENAME prompt
6. Select objective and press the [ENT] key.
7. Change position, mark shape, comment
as desired.
8. Select Exit? and press the [ENT] key.
9. Press the [MENU] key twice to finish.
3.5 Deleting Waypoints
1. Press the [MENU] key twice.
2. Select ERASE and press the [ENT] key.
WAYPOINTS/MARKS?
ROUTES?
TRACK?
GPS DATA?
MENU SETTINGS?
ALL BACKUP DATA?
ERASE
Figure 3-13 ERASE menu
3. The cursor is on the WAYPOINTS/
MARKS? line. Press the [ENT] key.
ERASE WP/MRK
[ALL?] CURSOR KOBE
MOB START -------
--------- ------- -------
--------- ------- -------
--------- ------- -------
--------- ------- -------
-------- ------- --------
Figure 3-14 ERASE WP/MRK display
4. Select the waypoint you want to erase.
Note: You cannot erase CURSOR, MOB
or START.
5. Press the [ENT] key.
NAME: KOBE
34
°
39.836'N MARK
135
°
12.059'E +
12–DEC–97 11:25
Quit? ERASE?
Figure 3-15 ERASE prompt
6. Select ERASE? and press the [ENT] key.
7. Press the [MENU] key twice to finish.