L-20 – First Alert ACTION T-1000 User Manual

Page 27

Advertising
background image

Using Single-sheet

Paper

6.

Press and release

the AUTO LOAD

button (the same button as the

DRAFT/LINE FEED

button). The paper is automatically loaded to the

top of

the

page.

7. Push the

ON/OFF LINE

button so that the printer is ready to print.

Note: Make sure the front lid is in place whenever you print.

(Always snap the lid shut when replacing

the

lid.) The front lid

doubles as a paper bail, holding the paper against the platen.

8. If the paper is crooked and needs to be reloaded, pull the paper

release lever forward, pull out the paper, push the lever back,

turn the printer off, and reload by beginning again at step 1 in

the

“Automatic paper loading” section above. If the paper just requires

minor adjustment, then pull the paper release lever forward, open

the front lid, adjust the paper, and push the lever back. Then

close the front lid.

l-20

Setting Up

Advertising