First Alert ACTION T-1000 - Manual (Page 52)

Problem/Solution Summary
Problem Solution
All the text is printed
on
the same fine or
text is printed with an
extra blank line
between
This can usually be corrected by changing the
setting of DIP switch
2-4.
If that does not
solve the problem, you may need a different
cable.
Some of the
characters printed do
not match those in the
file
If they are international characters, check the
settings of DIP switches 1-6 to l-8. If they are
graphics characters, see that your software is
correctly installed and that you have correctly
set DIP switch
l-3.
See that the printer cable is securely plugged
in.
Can’t get condensed
print
Cancel emphasized mode; it has priority over
condensed.
Cancel NLQ mode; it has priority over
condensed.
Troubleshooting and Maintenance 4-3