FUJITSU XG1200 - Manual (Page 39)

38 Appendix
The product specifications of the XG1200 are as follows:
The installation specifications of the XG1200 are as follows:
Appendix-A
Specifications
This section details the specifications of XG1200.
A.1 Product Specifications
Items Overview
10 Gigabit ports Port 1 - Port 12 IEEE802.3ae/ak compliant 10 Gigabit Ethernet port × 12
(for Xenpak modules)
Serial port RS-232C D-SUB9 × 1
Console connection port
Management LAN Mng-LAN 10BASE-T/100BASE-TX × 1
Indicators LED Power (Green), Alarm (Orange), Status (Green)
Front fan, Rear fan, Power supply units
A.2 Installation Specifications
Items Specifications
Dimensions
(Excluding protrusions) Width 440mm
Depth 480mm
Height 86.9mm
Maximum weight 20kg
Power Cord for 3-pin socket (grounded)
Power source Voltage AC100 (-10%) - 240V (+10%)
Phase Single-phase
Frequency 50 or 60Hz (+2% / -4%)
Input current 100 - 240V 2.8 - 1.2A/Input
Ambient
temperature XG1200 on +5 - +40°C (Inlet temperature)
XG1200 off 0 - +50°C (Inlet temperature)
Ambient
humidity XG1200 on 20 - 80%RH (Non-condensing)
XG1200 off 8 - 90%RH (Non-condensing)
Temperature gradient XG1200 on 15°C/hr or less (Non-condensing)
XG1200 off
Ambient dust 0.15mg/m 3 or less
Ambient noise 55dB or less
Electromagnetic compatibility FCC Class A
CE Marking
Service area Front 800mm
Rear 800mm
Installation 2U in a 19-inch rack (occupies two
pitches)