FUJITSU FBR12 - Manual (Page 3)

3
FBR12 SERIES
DISCONTINUED
(2002)
Item High Sensitive Type
Standard (Gold-overlay silver-nickel) -P type (Gold-overlay silver-palladium)
Contact Arrangement 2 form C (DPDT)
Material Gold-overlay silver-nickel Gold-overlay silver-palladium
Style Bifurcated
Resistance (initial) Maximum 100 m
Ω
(at 0.1 A 6 VDC)
Rating (resistive) 0.3 A 125 VAC or 1 A 30 VDC
Maximum Carrying Current 2 A (at 20
°
C)
Maximum Switching Power 62.5 VA or 30 W
Max. Switching Voltage* 1 250 VAC or 220 VDC
Maximum Switching Current 2 A
Minimum Switching Load* 2 10m VDC - 10
µ
A
Capacitance Approximately 1.0 pF (between open contacts, adjacent contacts )
(at 10 kHz) Approximately1.0 pF (between coil and contacts)
Coil Nominal power (at 20
°
C) Approximately 50mW
Operate power (at 20
°
C) Approximately 40m W
Operating Temperature –40
°
C to +70
°
C (no frost) (refer to the CHARACTERISTIC DATA)
Operating Humidity 45 to 85%RH
Time Value Operate (at nominal voltage) Maximum 5 msec.
Release (at nominal voltage) Maximum 5 msec.
Insulation Resistance (initial) Minimum 1000 M
Ω
(at 500 VDC)
Dielectric between open contacts
750 VAC
Strength
adjacent contacts 1 minute
between coil and contacts 1,500 VAC 1 minutes
Surge between open
1,500 V
Strength contacts,
10
×
700
µ
s
adjacent contacts
between coil and contacts 2,500 V
2
×
10
µ
s
Life Mechanical 1 x 10 8 operations minimum
Electrical DC 2
×
10 5 operations minimum 5
×
10 5 operations minimum
(at contact rating)
AC 1
×
10 5 operations minimum 200
×
10 3 operations minimum
Other Vibration Misoperation 10 to 55 Hz (double amplitude of 3.3` mm)
Resistance
Endurance 10 to 55 Hz (double amplitude of 5.0 mm)
Shock Misoperation 500 m/s 2 (11
± 1 ms)
Resistance
Endurance 1,000 m/s 2 ( 6
± 1 ms)
Weight Approx. 1.9 g
■ SPECIFICATIONS
* 1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
* 2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment.
The minimum switching load varies with the switching frequency and operation environment.