FUJITSU fi-5950 - Manual (Page 141)

121
5.2 How to check and reset the Consumable/Cleaning Counter
5
REPLA
C
EMENT OF CONSUMABLES
5.2 How to check and reset the
Consumable/Cleaning Counter
This section describes the procedure of the following items using Software Operation Panel in PC.
• Confirmation of consumable usage and cleaning cycle.
• Counter reset after replacing the consumable or cleaning the scanner.
■ Checking consumable or cleaning counter
1. Turn on the scanner and confirm if it is connected correctly to you PC.
2. From the [Start] menu select [All Programs] [Scanner Utility for
Microsoft Windows] [Software Operation Panel] .
⇒ The [Software Operation Panel] window will be displayed.
ATTENTION
If the [Software Operation Panel] is password protected, enter the pass-
word to cancel the View Only mode.
For details on how to enter the password to cancel the View Only mode,
refer to
“Password Setting” on page 175 .