Scanner settings ［ device settings 2 – FUJITSU fi-5950 User Manual
Page 203
183
8.1 Scanner Settings
8
SCANNER SETTINGS
［Device settings 2］
Selecting each item displays detailed settings (parameters) in the right part of the dialog box.
Item
Explanation
Selectable parameter
Default
Multifeed
Select the method to detect Multifeed.
(Check either of overlapping or document
length, or both of document length and over-
lapping)
None/Check Overlapping
[Ultrasonic]/Check Length/
Check Overlapping and
Length.
Selectable length (to be
detected as length difference):
10, 15 or 20mm
Check
overlapping
Multifeed detec-
tion when scan-
ning in manual
feeding mode
Multifeed can be detected by this setting,
even if the manual feeding is set.
Disable/Follow driver settings Disable
Page Edge Filler
(ADF)
Fill the end sections of a specified-mm-wide
with white or black on the scanned image.
When the backing (background) color is
white, the end sections are filed with white;
and when the background color is black,
filled with black.
Top/left/right: 0 to 15mm
Bottom: -7 to 7mm (can be set
in increments of 1mm)
(A: Image area B: Filled area
A+B: Area to be output)
Top/Bottom/
Left/Right:
0mm
A
B