Basic scanner opera t ions, Switching back to the horizontal setting – FUJITSU fi-5950 User Manual
Page 45
25
2.7 Setting up the Stacker
2
BASIC SCANNER OPERA
T
IONS
3.
Move your hands away from the stacker slowly.
⇒
The stacker will be fixed in a position tilting forward.
<Switching back to the horizontal setting
1.
Slide the stacker out towards you.
2.
Push down the inner part of the stacker.
⇒
The stacker goes back into its horizontal position.
HINT
• When set to “Bottom edge” position, the stacker does not move up or down
and becomes immovable even during scanning operation.
• In this position, the stacker’s maximum load will be 200 sheets.
• If the pages do not stack well, use the Document Smoother. (
the Document smoother” on page 27
)
ATTENTION
When you align the documents from the leading edge (by tilting forward
setting of stacker), the documents must meet the following conditions:
Length
(
)
Width
(
)
÷
1.5
<
Ԙ
Ԙ
ԙ
ԙ