Fujitsu Siemens Computers LifeBook N3520 - Manual (Page 13)

13
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current security configuration. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields
for the Security menu and its submenus, all of the
options for each field, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
The default condition is no passwords required and no
write protection.
Figure 13. Security Menu
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.
■ Entering a password incorrectly 3 times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled] to be displayed.
If this happens restart the computer by
turning off and on the power with the
power switch and use the correct pass-
word on reboot.
■ If you make an error when re-entering
the password a
[Warning] will be dis-
played on the screen. To try again press
the Enter key and then retype the pass-
word. Press the Esc key to abort the
password setting process.
■ If the Power Management Security is
Enabled and the Password on Boot is
Disabled you will not have to type your
password upon resuming the system
from the Suspend or Save-to-Disk
modes. Power Management Security
will work only if Password boot is
enabled.
Insyde Bios Setup Utility Oct 18, 2005 5:05:30 PM
System
Primary Master : FUJITSU MHT2100AT
Secondary Master : MATSHITADVD-RAM UJ-831S
BIOS Version : x.xx
BIOS Date : xx/xx/xx
BIOS Area : E000h - FFFFh
Supervisor Password Is : Clear
User Password Is : Clear
Primary Master Password Is :Clear
Asset Number : None
CPU
Memory
Press <Enter> Key to set Supervisor Password to enable any Password Features.
Main Advance Security Boot Exit
Set Supervisor Password
Set User Password
Minimum User Password Length
_ Password on Boot
_ On Automatic Wake Up
_ KB Lock on Resume
Boot from Removable Media
Flash Write
Hard Disk Security
Owner Information
T otal : 512 MB
Slot 1 : 256 MB DDR2
Slot 2 : 256 MB DDR2
S peed: 1.73 GHz
I ntel(R) Pentium(R) M 740
2 Cache: 2048 KB
Owner Informat ion Is : Clear
Then Password Entry is required to enter BIOS Setup.
1 Cache: 64 KB
S e c u r i t y M e n u