Fujitsu Siemens Computers LifeBook N3520 - Manual (Page 20)

20
L i f e B o o k N S e r i e s N o t e b o o k B I O S
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.) The following table shows the names of the menu fields
for the Exit menu and a description of the field's func-
tion and any special information needed to help under-
stand the field's use.
Figure 21. Exit Menu
Table 21: Fields, Options and Defaults for the Exit Menu
Menu Field Description
Save and Exit Save and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then exit the setup
utility. A confirmation message asking if you want to save the current parameters will be displayed. Click [OK] to
save and exit, or [Cancel] to close the Save and Exit window. This action can also be accomplished by pressing the
[F10] key.
Exit (No Save) Exit (No Save) will exit the setup utility without savings any changes you may have made. A confirmation message
asking if you want to exit will be displayed. Click [OK] to exit, or [Cancel] to close the Exit (No Save) window.
Default Settings Selecting Default Settings will display a message asking if you want to load the default settings. When confirmed
the setup utility will return to the Information Menu. This action can also be accomplished by pressing the [F9] key.
Restore Settings Selecting Restore Settings will load the previous values in BIOS memory for all menu fields. A message asking if you
want to load original custom settings will be displayed. When confirmed the setup utility will return to the Exit
menu.
Save Changes Selecting Save Changes will save any changes you’ve made into the BIOS memory for all menu fields. A message
asking if you want to restore the current setup to the original custom values will be displayed. When [OK] is pressed,
the changes will be saved.
Save Changes and
Power Off Selecting Save Changes and Power Off will save any changes you’ve made into the BIOS memory for all menu
fields, then the system will power off. A message asking if you want to restore the current setup to the original cus-
tom values will be displayed. When [OK] is pressed, the changes will be saved and the system will shut down.
Exit
T00
RAM UJ-831S
CPU
Intel(R)
Speed:
L1 Cache
L2 Cache
Save and Exit
Exit (No Save)
Default Settings
Restore Settings
Save Changes
Save Changes and Power Off