Fisher-Price WRANGLER K4564 - Manual (Page 13)

H4435pr-0920
18
13
ASSEMBLY F
K4564pr-0923
Holder
17
• Using safety scissors, cut the plastic tie holding Backpack in the
holder. Remove Backpack from the holder.
Note to Retailer: Do not remove the plastic tie. Simply lift Backpack
from the holder and assemble the holder to the top edge of the
vehicle. Replace Backpack in the holder.
Backpack
• Fit the holder to the top edge of the vehicle as shown.
• Insert a #10 x 1" screw into the holder and tighten.
• Replace Backpack in the holder.
• Fit the spacers between the upper holes of the brush
guard and the front end of the vehicle .
• Insert two #8 x 4" screws through the two upper holes
in the brush guard, through the spacers and into the
front end of the vehicle . Tighten the screws.
Spacers
#8 x 4" Screws
16
A
B
A
B