Fisher-Price WRANGLER K4564 - Manual (Page 9)

H4435pr-0920
3
• Insert a #10 x 1" screw into the back edge of the seat. Tighten
the screw.
• Position the roll bar so that it bends toward the back end of
the vehicle.
• Insert and "snap" the roll bar into the large holes in the top side of
the vehicle, as shown.
• Pull up on the roll bar to be sure it is secure.
• Fit both tabs on the front end of the seat into the slots in the vehicle.
Seat Tabs
Slots
Roll Bar
Hole
Hole
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
WARNING
1
9
ASSEMBLY F
2
K4564pr-0923
#10 x 1" Screw