Final Sound S100 - Manual (Page 8)

Contents Copyright 2006 Final Sound Solutions.
8. CABINET CARE
The finish on the S100 is a high strength, scratch-resistant acrylic . However, as with all fine furniture finishes the
cabinet can still be scratched .
Always unplug the S100 prior to cleaning .
Do not clean or dust the cabinet with any abrasive cleaner . Use only a fine quality spray or wipe-on furniture/dust
cleaner .
Do not use any abrasive rag or scrubber . Use only a lint-free clean cloth .
Never use a liquid to clean the cabinet or amplifier .
9. SPECIFICATIONS
Size 30cm cube, with 5cm high feet
Weight 16 kilograms
Anechoic Frequency Response 30 Hz to 250 Hz, ±3 dB
In-Room Frequency Response Typically 25 Hz to 250 Hz, ±3 dB
THD Less than 3% THD at 94 dB SPL from 30 Hz and up
Maximum Output 110 dB SPL in room
Amplifier Type Discrete class A/B with linear power supply
Volume Adjustment 60 dB of range
Crossover Frequency 40 Hz to 250 Hz
Crossover Type 2 nd order Butterworth (12 dB/octave, Q=0 .707)
Subsonic Filter 2 nd order Butterworth at 22 Hz
Phase Adjustment Selectable between 0 to 180 degrees
Power Output 100W RMS/200W Peak
Power Consumption 200W RMS on/12W in standby
Low Level Input Impedance 20 k Ω
High Level Input Impedance 2 k Ω
Effective Internal Volume 22 liters sealed with 400 grams of polyester stuffing
Driver 20 cm long throw driver with XBL 2 motor technology
8