Freecom Technologies MediaPlayer Drive-In Kit - Manual (Page 10)

10
Freecom MediaPlayer Drive-In
GB
1
Chapter 1: Use as External USB HDD
1.1 Insert Hard Disk
• Only use a 3.5" IDE Hard Disk for Desktop.
• Hard Disk should be jumpered as "Master". However, if the Hard Disk
supports "Single" mode, you need to try to set "Single "mode.
1. Unscrew the 4 screws and open the cover by
sliding it in the direction of the arrow
2. Connect Power and IDE 40-pin connector to
Hard Disk.
3. Close the cover by sliding it in the direction
of the arrow.