Freecom Technologies MediaPlayer Drive-In Kit - Manual (Page 40)

40
Freecom MediaPlayer Drive-In
GB
2
9. Check 'Use the following IP address', and write 'IP address' & 'Subnet mask'
that you want to use. For example:
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
If you have already been provided a dynamic IP address from
DHCP Server or IP Router on your local area network, you don't
need to enter a static IP address. Use 'Obtain an IP address
automatically' or enter the IP address & Subnet mask that DHCP
Server or IP Router provides.
10. Set the network configurations of the player.
You have to connect the player to a TV set for this setup. See
"3.1.1 Connect Video Cable".
Press [SETUP] on remote control for moving to setup screen. Select 'DHCP off'
and write IP address & Subnet mask. For example:
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0