Freecom Technologies MediaPlayer Drive-In Kit - Manual (Page 47)

47
GB
2
Check 'Off' and click 'OK'
10. Set the network configurations of the player.
You have to connect the player to a TV set for this setup. See
"3.1.1 Connect Video Cable".
Press [SETUP] on the remote control for moving to setup screen. Select
'DHCP off' and write IP address & Subnet mask.
For example:
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After entering the numbers, press [SETUP] again to save the configurations.
Access PC via Network