FujiFilm A470 - Manual (Page 12)

22 23
Using
the
Camera
2
Bebeep
● ! The image shown on the LCD monitor before the picture is
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(
➡P.26).
Use the LCD monitor to frame the shot so that the
subject fills the entire AF (Autofocus) frame. 5
Press the shutter button down halfway. When a
short double-beep is heard, the camera focuses on
your subject. The AF frame on the LCD monitor
becomes smaller and the camera sets the
exposure (brightness). The indicator lamp (green)
changes from blinking to lit.
● ! When a short double-beep is not heard and “ { ” appears on
the LCD monitor, the camera cannot focus.
● ! Pressing the shutter button down halfway freezes the image
on the LCD monitor briefly. This image is not the recorded
image.
● ! When “ { ” appears on the LCD monitor (the shooting
condition is too dark to focus on the subjects etc.), press
again the shutter button down halfway or try standing about 2
m (6.6 ft.) from your subject to take the picture.
● ! The flash fires several times (pre-flashes and the main flash).
6
Before the flash fires, “ ∑ ” appears on the LCD monitor. When selecting a slow shutter speed that
will cause camera shake, “ | ” appears on the LCD monitor. Use the flash to take pictures.
According to the scene or mode being shot, use a tripod.
10 10 NN
1/250 F5.6 1/250 F5.6 1/250 F5.6
AF frame
Press the shutter button down fully. When a
clicking sound is heard, the camera records the
image.
● ! There is a slight delay between the shutter button being
pressed and the picture being taken. Play back the shot to
check the image.
● ! When pressing the shutter button down fully in one motion,
the camera takes the picture without the AF frame changing.
● ! When the camera takes the picture, the indicator lamp lights
orange (shooting disabled).
● ! When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
● ! See P.104-105 for information on the warning displays.
7
Click
◆
Subjects not suitable for autofocus
◆
FinePix F470 uses a high-precision autofocusing mechanism. However, it may have difficulty focusing
on the following:
h Very shiny subjects such as a mirror or car
body
h Subjects photographed through glass
h Subjects that do not reflect well, such as hair
or fur
h Subjects with no substance, such as smoke or
flames
h Dark subjects
h Fast moving subjects
h Subjects with little or no contrast between the
subject and the background (such as white
walls or subjects dressed in the same color as
the background)
h Shots where another high-contrast object (not
the subject) is close to the AF frame and is
either closer or further away than your subject
(such as a shot of someone against a
background with strongly contrasting
elements)
For such subjects use AF/AE lock ( ➡P.24).
Display Status
Lit green Locking the focus
Blinking green Camera shake warning, AF warning or AE warning (ready to shoot)
Blinking green and
orange alternately Recording to xD-Picture Card or internal memory (ready to shoot)
Lit orange Recording to xD-Picture Card or internal memory (not ready)
Blinking orange Charging the flash (flash will not fire)
Blinking red i Warnings for xD-Picture Card and internal memory
Card not formatted, incorrect format, memory full, xD-Picture Card or internal memory error
i Lens operation error
✽ Detailed warning messages appear on the LCD monitor (➡P.104-105).
INDICATOR LAMP DISPLAY
NUMBER OF AVAILABLE FRAMES
The number of available frames appears on the
LCD monitor.
● ! See P.41 for information on changing the quality setting.
● ! The default quality “ ˘ ” set at shipment is “ 5 N”.
N 10
■ Standard number of frames per xD-Picture Card / internal memory
The table below shows the standard number of frames for internal memory or a new xD-Picture Card formatted on the
camera. The larger the xD-Picture Card capacity, the bigger the difference between the actual number of frames and the
number shown here. Also, the size of an image file varies depending on the subject. So the number of remaining shots may
decrease by 2 or may remain the same. For this reason, the number displayed may not show the actual number of frames.
5 F
2816 × 2112
5
10
21
43
87
174
5 N
10
21
43
86
173
347
„
2816 × 1880
12
24
48
97
195
389
Quality setting
Number of recorded pixels
DPC-16 (16 MB)
2
1600 Ч 1200
25
51
102
204
3
2048 Ч 1536
20
40
81
163
326
652
410
819
`
640 Ч 480
124
5 10 12 Internal memory (approx. 16 MB) 25 20 124
249
499
999
1999
3995
DPC-32 (32 MB)
DPC-64 (64 MB)
DPC-128 (128 MB)
DPC-256/M256 (256 MB)
DPC-512/M512 (512 MB)
349 695 780 1305 1640 7996 DPC-M1GB (1 GB)
TAKING PICTURES ( B AUTO MODE) PHOTOGRAPHY MODE