Set-up – FujiFilm A470 User Manual
Page 40
79
Settings
4
78
î AUTO POWER OFF
When this function is active and the camera is left
unused for 2 or 5 minutes, it turns camera off. Auto
power off function prevents leaving the power on.
●
!
The Auto power off function is disabled during automatic
playing back and when a USB connection is being used.
AUTO POWER OFF
AUTO POWER OFF
OFF
OFF
:
:
:
:
:
:
:
OFF
OFF
SET
SET
OK
OK
2
MIN
MIN
2
MIN
MIN
5
MIN
MIN
SET
SET
1
3
2
ON
ON
◆
To restore power to the camera
◆
Press the “POWER” button to turn the camera back
on for shooting.
Hold down the “
w
” button for about 1 second to play
back images.
ê LCD BRIGHTNESS
To adjust LCD monitor brightness:
1 Press “d” or “c” to adjust the LCD monitor
brightness.
2 Press the “MENU/OK” button to confirm the new
setting.
SET
SET
CANCEL
CANCEL
4
5
-
+
3 2 1
0
1 2 3 4 5
0
1
0
2
ë DIGITAL ZOOM
The position of the “ ” indicator on the
zoom bar shows the zooming status.
The area to the right of the separator
indicates digital zooming, while the area
to the left indicates optical zooming.
Zoom bar display
Optical zoom
Digital zoom
Use this function to control the digital zoom.
When zooming changes between optical and
digital, the position of the “
■” indicator stops. Press
the same Zoom button again to start the “
■”
indicator moving again.
●
!
If the shot goes out of focus during zooming, hold the shutter
button down halfway to refocus the shot.
h Optical zoom focal length
✽
Approx. 35 mm to 105 mm,
max. zoom scale: 3
×
h Digital zoom focal length
✽
Approx. 105 mm to 462 mm,
max. zoom scale: approx. 4.4
×
✽ 35 mm camera equivalents
DIGITAL ZOOM
DIGITAL ZOOM
OFF
OFF
:
:
:
:
:
:
OFF
OFF
ON
ON
SET
SET
OK
OK
2
MIN
MIN
SET
SET
1
3
2
ON
ON
Using the digital zoom allows you to enlarge your
subject and shoot it. However, it will lower your
image quality. Set the digital zoom when requiring it.
SET-UP
✽ How to use the SET-UP menu (➡P.74)
✽ How to use the SET-UP menu (➡P.74)
Î LCD POWER SAVE
When this function is active, you can save power
and get the maximum possible running time from
your battery.
The LCD monitor darkens when camera is not used
for 10 seconds.
LCD POWER SAVE
LCD POWER SAVE
OFF
OFF
:
:
:
:
:
:
OFF
OFF
ON
ON
SET
SET
OK
OK
2
MIN
MIN
SET
SET
1
3
2
ON
ON
When the LCD monitor is dark, pressing the shutter
button down halfway recovers the LCD monitor
brightness.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
●
!
The LCD power save function is disabled in automatic playing
back and movie mode.