FujiFilm A470 - Manual (Page 21)

40 41
Advanced
Features
3
This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
1 Set the Mode switch to Photography mode.
Press the “fi (a)” button.
“
” appears on the LCD monitor and the subject is
displayed brightly.
To cancel increased brightness:
Press the “fi (a)” button again.
This function is automatically canceled after each
shot.
● ! When this function is active, it will increase the amount of
speckling in images on the LCD monitor. This is normal and
does not affect the photographed image.
● ! This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
● ! Even if you increase the brightness in low-light conditions,
you cannot check the subject.
● ! The color tones may vary depending on the subjects.
2
UP UP
10 10 NN N F
N
QUALITY QUALITY
:
AUTO AUTO
STD
STD :
:
1 1 Set the Mode switch to Photography mode.
2 Press the “p” button to display the menu on the
LCD monitor.
1 Press “a” or “b” to select “˘” QUALITY.
2 Press “c”.
The quality setting is retained even when the
camera is off or the mode setting is changed.
2
0 1 0 2
0 1 0 2
AUTO AUTO
STD
STD :
:
F
N
N
2816x2112: 10 FRAMES FRAMES
:
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
● ! The numbers to the right of setting show the number of
available frames.
● ! When changing the quality setting, the number of available
frames also changes (
➡P.23).
3
0 1 0 2
˘ QUALITY MODE (NUMBER OF RECORDED PIXELS)
p PHOTO MODE PHOTOGRAPHY
Continued
fi INCREASING MONITOR BRIGHTNESS
PHOTOGRAPHY FUNCTIONS
Available Photography modes:
B and ?