Fujitsu Siemens Computers Fujitsu LifeBook B6230 notebook - Manual (Page 46)

41 - LifeBook Security/Application Panel
Windows Vista:
1 Go to the Start menu.
2 Select All Programs.
3 Select Security Panel Application and Set User Password.
4 Follow instructions to set the user password.
Operating Your LifeBook Security/ Application Panel
The security lock feature is in effect both when the system resumes from Off or Standby state. You always
need to push the Suspend /Resume button to input the user password. Your system will not begin the boot
sequence without entering your supervisor/user password.
From Off State
1 Turn on your system.
2 When the Security Indicator flashes, enter the password and press Enter button.
For example, if the password is 22222, press Button Number 2 five times and press [Enter] button. The LifeBook
notebook will boot to normal operation.
From Standby State
1 Press your Suspend/Resume button.
2 When the Security Indicator flashes, enter the password and press Enter button. The notebook should resume
normal operation.
Y OU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE .