Fujitsu Siemens Computers Fujitsu LifeBook B6230 notebook - Manual (Page 47)

42 - LifeBook Security/Application Panel
Incorrect Password Entry
If an invalid supervisor or user password is entered three times in succession, the system will “beep” for
about one minute. If a valid password is entered within a minute (while system beeps), the beeping will
stop and the notebook will resume normal operation. If no or an invalid password is entered while the
system beeps, the system will return to its previous locked state (standby or off) and the Security Indicator
will go off. To reactivate the notebook after a password failure, you must press the Suspend/Resume
button, then enter a correct password.
Precautions
Opening and Closing the Cover
Closing the cover automatically places the notebook into Standby mode. Opening the cover does not
automatically place the notebook into normal operation. Instead, you must enter the proper security
password after pushing the Suspend/Resume button.
Low Battery Operations
If your LifeBook notebook has low battery, pushing the suspend/resume button only turns on the Security
Indicator. Your notebook does not unlock, the Security Indicator turns off after one minute. To resume
normal operation, first attach a power supply to the notebook. Then you may unlock the notebook.
Uninstalling the Security Panel Application
You have two options when uninstalling the security panel application:
• Uninstall the security panel application software. This will disable all security feature.
• Uninstall the security panel application with password still active. This will not allow any changes
to the password.
R EMEMBER THE USER PASSWORD YOU SPECIFIED ON THE S ECURITY P ANEL A PPLICATION . I F YOU
FORGET THE PASSWORD YOU WILL NOT BE ABLE TO USE YOUR COMPUTER . T HE SUPERVISOR
PASSWORD CAN OVERRIDE THE USER PASSWORD .