FOCUS Enhancements SXGA - Manual (Page 18)

TView Micro SXGA User’s Guide
Hardware Installation 14
Connecting the TView Micro SXGA to a
Television
The next step in connecting your system is to connect to the
television. (If you are planning to connect to a VCR, see "Connecting
to a VCR" below.) There are two possible ways to connect to a
television:
• Using a composite video connection
• Using an S-Video connection
• Using a SCART cable (Europe only)
Composite Video Connection
Composite video is a connection type used by most televisions,
VCRs, laserdisc players, and certain LCD panels. The connectors on
a composite video cable have an RCA-type plug. The plug has a long
metal pin projecting from its center and plugs into the composite
video in port at the rear of the television.
Figure 2-3: Composite Video Connectors
To determine if your television supports composite video, look for a
port on your television that matches the composite video out port at
the rear of the TView Micro SXGA unit.