FOCUS Enhancements SXGA - Manual (Page 24)

TView Micro SXGA User’s Guide
Hardware Installation 20
7. Find a button on the front of the VCR called "Line," "TV/Video,"
"Video Input," or something similar. Press the button. If the
cables have been connected correctly, the image from the
computer monitor should now appear on the television screen.
Note If your VCR does not have a button specifying video-in,
use your VCR’s remote control to find an on-screen
programming system. Using the programming system
set the VCR to receive external video. If you are unsure
about how to do this, refer to the VCR owner’s manual.
Figure 2-6: Connecting the TView Micro SXGA to a VCR