Ethernet printer troubleshooting procedures, Ethernet printer troubleshooting procedures -56, Troubleshooting procedures -56 – FARGO electronic HDP600 User Manual

Page 194: Troubleshooting procedures

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.3)

5-56

Ethernet Printer Troubleshooting Procedures

Troubleshooting procedures

If you are having trouble connecting to your Ethernet Printer or printing to it, you should go
through each of the following procedures.

Step

Procedure

1

Follow the

Verifying the Printer Connection

procedure.

2

Follow the

Verifying the Printer IP address

procedure.

3

Follow the

Verifying that your PC can access the Printer using the ping

command

procedure.

4

Verify that you are choosing the correct Printer Driver. (Note: The Driver
must match the model of the Printer.)

5

Verify that the port configuration of the PC Printer Driver is set to
communicate to the Printer over the correct IP address.

See

Frequently-asked Questions

.

6

Follow the

Printing a test page

procedure.

Advertising
This manual is related to the following products: