Balai motorisé sans fil, Care and maintenance, Troubleshooting guide – Fantom Vacuum FS835 User Manual

Page 10

Advertising
background image

Balai Motorisé Sans Fil

1. Ensemble moteur de le balai
2. Interrupteur marche/arrêt
3. Témoin de recharge
4. Vide-poussière
5. Brosse rotative
6. Couvercle de brosse transparent
7. Accessoire de nettoyage des bords
8. Prise de recharge
9. Manche inférieur

Modèle FS835

7,2 volts c.c.

10. Tube de rallonge en métal
11. Manche télescopique en métal
12. Manche supérieur
13. Socle de recharge
14. Boîte à engrenages
15. Adaptateur de recharge

(TechWorld AD-0920-UL
régime nominal C. C. 9V, 200mA.)

Care and Maintenance

To improve the performance and life of your unit, we recommend you

do the following:

1. Once a month clean the unit with a dry cloth, including the chamber which

the dust container fits into. Remove any hair, fiber or other materials that

may have built up in the chamber, on the rotating brush or edging tool.

2. Don't use abrasive materials to clean the sweeper. Do not immerse the

unit in water.

3. Do not pick up liquids or use on wet floors.

4. Do not use on concrete, tar or similar rough surfaces .

5. Don't pick up pieces of string or fabrics with the sweeper.

6. Do not clean tasseled or frayed carpets with the sweeper.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE REASON

POSSIBLE SOLUTION

SWEEPER WILL NOT
OPERATE

1. Batteries

discharged.

2. No power in electrical

outlet supplying
transformer.

3. Unit needs servicing.

1. Charge

unit.

2. Check fuse or breaker.

Replace fuse/reset breaker.

3. Call

Customer

Service.

SWEEPER WILL NOT
PICK-UP

1. Dust container is full.
2. Unit needs recharging.

1. Empty dust container.
2. Charge

unit.

DUST ESCAPING
FROM SWEEPER

1. Dust container is full.

1. Empty dust container.

ROTATING BRUSH
WILL NOT PICK UP

1. Unit

clogged.

2. Dust container is full.

1. Check

for

excessive

material

on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.

2. Empty

and

clean

dust

container.

SWEEPER WILL NOT
CHARGE

1. Electrical

outlet

not

working

2. Charging

Adapter

not

working

3. Batteries no longer

functioning

1. Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace

charging

adapter

3. See battery disposal pg. 8.

REMARQUE : Le balai motorisé sans fil modèle FS835 est

expédiée avec des piles non chargées. Charger les
piles pendant 16 à 20 heures avant d'utiliser
l'appareil.

9

22

Advertising