FUJITSU SRS-9924 - Manual (Page 55)

3-19
3
Using the
NI
/
5E Custom
T
erminal Set-Up
Call Announce Intercom allows you to specify which
call buttons are activated by Call Announce
Intercom Call Screeners, and allows you to select
up to three Call Screeners.
Note: Call Announce Intercom is distinct from
Network (Switch provided) intercom.
The Call Announce feature utilizes a Ringer Always
On mode. Ringer Always On sends a tone to users
each time a Call Screener activates Call Announce
Intercom (regardless of the ringer mode).
This section describes the requirements for setting
up Call Announce Intercom followed by the
procedures to use Call Announce Intercom to
announce a call.
It is important to note that the set-up procedure is
done only on the call recipient’s set, and not on the
call screener’s. Before beginning the set-up
procedure, have the person who will be
screening your calls, call you and note how
the number is displayed on the first line of
your set’s LCD. Later, you will need to input
the number exactly as it is displayed.
919 926-3112
To enable or disable Call Announce Intercom on
selected buttons, follow these steps:
1.
OPTIONS 10 ENTER
INTERCOM FEATURE
SUPPORTED (ALL)
Ringer Always
On
Call Announce
Intercom on
Selected
Buttons