Freecom Technologies Storage Gateway NETWORK HARD DRIVE - Manual (Page 40)

40
Freecom Storage Gateway (FSG)
GB
3
3.4 Connections
3.4.1 LAN
Go to Connections –> LAN.
Here you can set up your connection to the local area network (LAN).
Options Description
IP address This is the IP address your FSG uses in your LAN
IP subnet mask This is your subnet mask
Workgroup This is the name of the workgroup where your FSG is located.
Router name Name of the FSG in the LAN. This name can be used to access
the web configuration (e.g. http://FSG) instead of using the IP
address. This makes it easier for the user to access the web
interface.
3.4.2 WAN
Go to Connections –> WAN.
You can configure your connection to the Internet or any other network on this screen.