Freecom Technologies Storage Gateway NETWORK HARD DRIVE - Manual (Page 58)

58
Freecom Storage Gateway (FSG)
GB
3
3.5.8 Mail server
Select Services -> Mail Server.
The mail server allows you to set up provider independent e-mail addresses for use by
individuals using your FSG. If you do not have your own domain name, you may also use
a Dynamic DNS address here. Example: Your DynDNS address is test.yourdyndns.org.
The admin e-mail address in the case would be [email protected].
Fetchmail allows you to retrieve e-mails from other accounts and manage them centrally
on your FSG.
For more details on using the mail server, please refer to the chapter 'Setting up the FSG
Mail Server'.
Options Explanation
Run Mail Server Enables the mail server.
Open IMAP and POP3 Permits the use of IMAP and POP3
server for the outside via the WAN port.
Open SMTP server for Permits the use of SMTP via the WAN port.
the outside
Run Fetchmail daemon Starts Fetchmail. Fetchmail allows you to get e-mails from
other e-mail accounts and allocate them to specific FSG
users. Fetchmail checks all accounts at preset intervals for
new e-mails.