Furman Sound PS-PRO II - Manual (Page 10)

P S - P R O I I - P O W E R C O N D I T I O N E R / S E q u E N C E R
FLASHING DELAy 1 INDICATOR
The DELAy 1 LED on a PS-PRO II flashes
to indicate that a remote switch is off or not
connected. In Maintained Mode (JMP1, MAINT
ON’s jumper plug is installed), this will only
occur when the REM terminal is tied to the +12V
terminal. In Momentary Mode, the LED flashes
if the stored state is OFF. Since the flashing
function is only concerned with the state of
the remote switch (or switches), note that it is
possible for this LED to flash even when the unit
is ON. This could occur when the PS-PRO II is
under local control (the key lock switch is in the
ON position). In this case, DELAy 1 would flash
and DELAy 2 and DELAy 3 would be steadily
lit. This serves as a warning that the unit will
sequence OFF if the key is turned to the REM
position.
THREE YEaR
lImITED WaRRaNTY
Furman Sound, LLC., having its principal place
of business at 1997 South McDowell Blvd.,
Petaluma, CA 94954 (“Manufacturer”) warrants
its PS-PRO II Power Conditioner / Sequencer
(the “Product”) as follows:
Manufacturer warrants to the original Purchaser
of the Product that the Product sold hereunder
will be free from defects in material and work-
manship for a period of three years from the date
of purchase. The Purchaser of the product is
allowed fifteen days from the date of purchase
to complete warranty registration by mail or on-
line at the Furman website. If the Product does
not conform to this Limited Warranty during the
warranty period (as herein above specified),
Purchaser shall notify Manufacturer in writing of
the claimed defects. If the defects are of such
type and nature as to be covered by this war-
ranty, Manufacturer shall authorize Purchaser to
return the Product to the Furman factory or to
an authorized Furman repair location. Warranty
claims should be accompanied by a copy of the
original purchase invoice showing the purchase
date; this is not necessary if the Warranty Reg-
istration was completed either via the mailed in
warranty card or on-line website registration.
Shipping charges to the Furman factory or to
an authorized repair location must be prepaid
by the Purchaser of the product. Manufacturer
shall, at its own expense, furnish a replacement
Product or, at Manufacturer’s option, repair the
defective Product. Return shipping charges back
to Purchaser will be paid by Manufacturer.
THE FOREGOING IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, IN-
CLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITy AND
FITNESS FOR A PARTICULAR PURPOSE.
Manufacturer does not warrant against damages
or defects arising out of improper or abnormal
use of handling of the Product; against defects
or damages arising from improper installation,
against defects in products or components
not manufactured by Manufacturer, or against
damages resulting from such non-Manufacturer
made products or components. This warranty
shall be cancelable by Manufacturer at its sole
discretion if the product is modified in any way
without written authorization from Furman
Sound. This warranty also does not apply to
Products upon which repairs have been affected
or attempted by persons other than pursuant to
written authorization by Manufacturer.
THIS WARRANTy IS EXCLUSIVE. The sole
and exclusive obligation of Manufacturer shall
be to repair or replace the defective Product in
the manner and for the period provided above.
Manufacturer shall not have any other obliga-
tion with respect to the Products or any part
thereof, whether based on contract, tort, strict
9