FUJITSU FMB AN706 - Manual (Page 28)

AN706-00040-2v0-E
27
6.2 AAC File Play
(1) From Preparation to Power On
Audio data (music1.aac to music5.aac) is contained in the root directory of the USB
memory.
Insert USB memory in USB memory connector of simple AV system board.
Connect earphones or speakers to the speaker connector.
Connect USB cable to the USB connector for power supply.
Press power switch (power on).
(2) Song Selection Operation
Pressing the song selection next button selects audio file in the following order.
music1.aac => music2.aac => ... => music5.aac
If the next switch is pressed while music5.aac is selected, music5.aac is then
selected.
Pressing the song selection previous switch selects audio file in the following order.
music5.aac => music4.aac => ... => music1.aac
If the next switch is pressed while music1.aac is selected, music1.aac is then
selected.
LED1 to LED5 correspond to music1.aac to music5.aac; the lit LED indicated the file
currently selected.
Songs cannot be selected while music is being played. Stop playing to select.
Selection Next Switch
Selection Previous Switch
Figure 24 Song Selection by Previous/Next Switch