Furuno MU-155C - Manual (Page 20)

14
Remote controller
VIDEO2 VIDEO1
BRILL +
RGB1 RGB2
MENU
VIDEO3
DVI
PIP1 PIP2 PIP3
Remote controller
Key name Function
RGB1* Shows the RGB1 signal.
RGB2* Shows the RGB2 signal.
DVI Shows the DVI signal.
VIDEO1** Shows the VIDEO1 signal on the entire screen.
VIDEO2** Shows the VIDEO2 signal on the entire screen.
VIDEO3** Shows the VIDEO3 signal on the entire screen.
PIP1*** Shows the VIDEO1 signal in the picture-in-picture window.
PIP2*** Shows the VIDEO2 in the picture-in-picture window.
PIP3*** Shows the VIDEO3 in the picture-in-picture window.
BRILL (+) Increases the display brilliance.
BRILL (-) Decreases the display brilliance.
MENU Shows the main menu.
Arrow keys Selects the menu items.
*: When a picture-in picture window is shown, it remains on the RGB1 (2).
**: When the previous selection is PIP1, 2 or 3, it is erased by pressing these keys.
***: When the previous selection is VIDEO1, 2 or 3, these keys are not available.
For PIP (picture-in-picture), see “3.2 VIDEO Setting”.